Re: 1937 120 Conv. Sedan - Blanche

Posted by 37Blanche On 2024/5/12 13:26:13
Ok. I dropped the tank again. Reconfirmed ground. Did a ground in the gauge as well. Still no change. Then I hooked up my old original sending unit which worked fine before and same result. So it is not the unit since same results. I also tested by grounding the wire between the gauge and the sending unit and it did pop to full so gauge is in order. I am at a bit of a loss right now. The new unit is from Max M. Will call YnZ tomorrow and see if they have any thoughts.
Thanks for the feedback. If any other ideas please continue to pass along.

This Post was from: