Re: Tom Malas "1931 833 Restoration "
Posted by Tom (Packin31) On 2012/6/19 21:57:46
Some progress on the rims. Have then stained and first cost of Satin Spar Urethane. In a day or two I will lightly sand them with 220 and then put another coat of Spar Urethane but that coat will be gloss.
Once I have the wood portion finished I will tape them off so I could sand the metal portion, epoxy prime, a few coats of SPI Single Stage Black and they should be ready for tires which I still need to order.
First two picture are without flash last one is with flash.
Attach file:
(127.40 KB)
(138.53 KB)
(129.24 KB)
Once I have the wood portion finished I will tape them off so I could sand the metal portion, epoxy prime, a few coats of SPI Single Stage Black and they should be ready for tires which I still need to order.
First two picture are without flash last one is with flash.
Attach file:
(127.40 KB)
(138.53 KB)
(129.24 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=103806