Been awhile since I have updated my blog so here is where I am ay.
Had some setbacks today I went to do some final 400 sanding on one of the doors. Placed it outside on some saw horses and low and behold lower half of door where I had done some bondo work (I used Evercoat Extreme and some Metal Glaze) it has Spider Webbed on me.
I sprayed some w&g on it as highlights the cracks First picture is before I stripped it back down to bare metal the second picture is after I went to the home store and picked up 60 grit stripping disc for my 4 1/2" electric grinder since my little air die grinder was sucking up may to much air for my compressor to handle.
Attach file:
(12.41 KB)
(14.13 KB)
(23.43 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=7641