Re: Larry's 1951 Club Sedan Project
Posted by HH56 On 2012/4/6 21:07:58
The Boss BRS69 at 3" is the smallest depth 4 ohm I find in new speakers. They must be ashamed to show the back though. Of the gazillion stores that sell the thing, not one shows the magnet side.
If you have no luck finding one, wonder if there is any chance of buying an inexpensive speaker like that Boss or maybe the one you have and carefully transferring the cone to the old frame. It's precision work but should be possible for careful DIY types -- if they are reasonably close in size.
This company sells a lot of stuff for the purpose and has how to videos and printed instructions which make it look to be not too terribly difficult -- at least with new materials.http://www.simplyspeakers.com/ Even though they are geared to higher end products in the how to material, would think the principles apply.
You probably have it already in your schematics but here is speaker specs.
Attach file:
(19.21 KB)
If you have no luck finding one, wonder if there is any chance of buying an inexpensive speaker like that Boss or maybe the one you have and carefully transferring the cone to the old frame. It's precision work but should be possible for careful DIY types -- if they are reasonably close in size.
This company sells a lot of stuff for the purpose and has how to videos and printed instructions which make it look to be not too terribly difficult -- at least with new materials.http://www.simplyspeakers.com/ Even though they are geared to higher end products in the how to material, would think the principles apply.
You probably have it already in your schematics but here is speaker specs.
Attach file:
(19.21 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=98470