Re: Peterson's 1940 Packard
Posted by West Peterson On 2010/3/5 15:37:17
31. After placing the brake drum back onto the axle spindle, push the newly packed bearing into place (again, narrow end first).
32. Tighten the nut, with the alignment button, all the way down with medium force. This will seat the bearing snug with the race.
Attach file:
(96.90 KB)
(81.47 KB)
32. Tighten the nut, with the alignment button, all the way down with medium force. This will seat the bearing snug with the race.
Attach file:
(96.90 KB)
(81.47 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=48689