Re: Peterson's 1940 Packard
Posted by West Peterson On 2010/3/8 11:34:13
If you ever remove one of your Delco shocks, take some notes:
1. There are some leveling washers between the shock body and the frame. These are not meant for alignment. Only to create a flat surface. Make sure you replace the different thickness washers back to the same spots.
2. Each bolt is unique. Write a note as to which bolt came out of each hole.
Attach file:
(97.68 KB)
(142.51 KB)
1. There are some leveling washers between the shock body and the frame. These are not meant for alignment. Only to create a flat surface. Make sure you replace the different thickness washers back to the same spots.
2. Each bolt is unique. Write a note as to which bolt came out of each hole.
Attach file:
(97.68 KB)
(142.51 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=48932