Re: 56 Patrician bought off ebay

Posted by Randy Berger On 2014/3/18 21:28:08

I've been feeling better, so climbed underneath the Pat and weatherstripped the gasket to the block first, then siliconed the cork ends in place. Mounted the pump and connected the vacuum line. I have all the bolts back in the pan except the #$%^&*@ one at the front on drivers side. Thought about drilling a hole up thru the Xmember, but that's too much like work. Should have all connected tomorrow and after I remove the Dist. and lube the engine by driving the oil pump with a drill, it should fire up.
This is a rebuilt pump from Jack Vines.

Attach file:

---

  (67.30 KB)


  (76.35 KB)