Re: 51Packard's....51 Packard
Posted by Charles On 2010/8/17 19:58:12
8-17-10
Crawled under the car today and reached up behind the valve body (toward the rear of the trans). I could feel something loose moving around. Maybe that is the holding plate for the rear band (or it could be wishful thinking)? I was going to download the ultramatic manual to confirm that is where it is located, but my wife is tying up all of the bandwidth.
After that, I took out the bolts and removed the control valve body.
I was comparing it to the other valve body I have and I noticed that on one of the pumps, the center shaft was sticking up. I tried to push it down, but it wasn't moving easily and I didn't want to force it until I looked it up more. Maybe this is why H is not working? Below are some pics. The spare valve body is on the plastic bag. I also remember now why this is a spare. The shift selector valve does not go all the way into the cylinder. I think the body got warped somehow. Feel free to offer any ideas/advice!
Attach file:
(154.05 KB)
(107.62 KB)
(110.56 KB)
Crawled under the car today and reached up behind the valve body (toward the rear of the trans). I could feel something loose moving around. Maybe that is the holding plate for the rear band (or it could be wishful thinking)? I was going to download the ultramatic manual to confirm that is where it is located, but my wife is tying up all of the bandwidth.
After that, I took out the bolts and removed the control valve body.
I was comparing it to the other valve body I have and I noticed that on one of the pumps, the center shaft was sticking up. I tried to push it down, but it wasn't moving easily and I didn't want to force it until I looked it up more. Maybe this is why H is not working? Below are some pics. The spare valve body is on the plastic bag. I also remember now why this is a spare. The shift selector valve does not go all the way into the cylinder. I think the body got warped somehow. Feel free to offer any ideas/advice!
Attach file:
(154.05 KB)
(107.62 KB)
(110.56 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=58076