Re: BigKev's 1954 Packard Clipper Deluxe Sedan
Posted by BigKev On 2007/6/30 22:29:01
Well the engine is degreased, derusted and it looks like fresh cast. I started the painting of it, but because of the paint snafu, that is on hold for the moment.
I installed the NOS Delco breaker plate in the distibutor, and also finished the holddown clamp, and greasecup in Silver Cadium paint. I also used the same paint on the fuel pump to keep it looking clean and bright. The throttle linkage will get the same treatment.
I did get the manifolds stripped down to bare cast iron. So those are ready for paint.
Attach file:
(32.48 KB)
I installed the NOS Delco breaker plate in the distibutor, and also finished the holddown clamp, and greasecup in Silver Cadium paint. I also used the same paint on the fuel pump to keep it looking clean and bright. The throttle linkage will get the same treatment.
I did get the manifolds stripped down to bare cast iron. So those are ready for paint.
Attach file:
(32.48 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=1527