Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by BigKev On 2007/10/14 19:08:48

Well I pulled the backing plates off. It required me to use the impact gun to break the bolts loose.

With the back plates off I spend about an hour with a large screwdriver scraping gunk off of the steering knuckles. I think I chisled off 5 lbs of muck. I ran out of brake cleaner, so I will need to make a stop by the store so I can finish the cleanup.

With the bolts removed from the backing plate this also allowed me to remove the steering arm from the knuckle. this made it easier to clean everything up.

Slowly it's coming along.