Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by Mr.Pushbutton  On 2007/10/30 20:56:20

Kev--take those new wheel cylinders apart and clean all of the anticorrosion goo off of the parts inside. Use lacquer thinner on the metal parts, denatured alcohol on the rubber parts. I like to hit the raw wheel cylinder casings with a rattle can of gray or silver paint(or black if thats all that's handy), masking off the inner bore. Put the cylinders back together by coating all of the parts with the fluid that you intend to run the system on--dot 5,4,3 whatever.