Re: The Duchess Project: 1940 Super 8 Convertible Sedan

Posted by Joe Santana On 2020/12/31 13:39:51
That's Very helpful, Dave. Thanks so much. I do have a pressure gauge.

I was going to do a pressure check on the fuel going to the filter with my sister's help pressing the starter with the ignition off.

Also, shouldn't that fuel filter be completely full when the engine is running?
Should those air bubbles be present?

I RARELY run the electric fuel pump, unless I have vapor lock, but I turned it on to see if I wasn't getting enough fuel, but of course it over flowed.

The floats should stop gas coming into the carb and prevent that overflow, right?

Anyway, not anxious to remove the top of the carb. It was rebuilt by Daytona, but they didn't set the floats correctly and the car would stall out as soon as it had a load. They fixed it, but I wonder if it's a problem float. Not sure how hard it is to correct. I will work on the other issues in the meantime and report results.

Thanks again.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=229265