Re: The Duchess Project: 1940 Super 8 Convertible Sedan

Posted by Joe Santana On 2021/1/2 13:17:30
Thanks, Everyone.

Dave - I won't use anything but a gasket-spacer-gasket.

JW - That tube with the rubber is. the Throttle Guard vacuum tube. I was told at the Oregon shop that is was leaking air so they disconnected it and added. the rubber. The auto choke heat tube is on the bad side.

I took pix of all the disassembly in hopes I can put it all back together correctly. I'll post those later.

Kevin - You're absolutely right. There was just a gasket and no spacer. Most likely the cause of the volatile winter bland gas getting hot and percolating. Of course it never did this in 2 years since the carb went on until I bought a tank of winter blend in November.

I removed the carb and removed the studs using the double nut method. On my way to auto store for 2" studs instead of the 1-1/2" ones I pulled.

Fingers cross. Thanks again.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=229308