Re: The Duchess Project: 1940 Super 8 Convertible Sedan
Posted by HH56 On 2022/4/25 10:10:01
If someone has difficulty finding a NOS switch with female terminals or it is prohibitively priced you could change the male terminal now on the wire to a .156 female bullet terminal available at most parts stores and use the modern switch.
If you want wires to stay stock then use a .156 bullet 2 way connector to bridge the new vs. old. One end of the 2 way connector would go on the male terminals of new switch and the old male terminals on the wires could go in the other end of the 2 way connector.
No idea if the 2 ways are sold in small quantity at parts stores like the female terminals but Amazon has them in bulk.
Attach file:
2 way.jpg (76.12 KB)
If you want wires to stay stock then use a .156 bullet 2 way connector to bridge the new vs. old. One end of the 2 way connector would go on the male terminals of new switch and the old male terminals on the wires could go in the other end of the 2 way connector.
No idea if the 2 ways are sold in small quantity at parts stores like the female terminals but Amazon has them in bulk.
Attach file:
2 way.jpg (76.12 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=243086