Re: The Duchess Project: 1940 Super 8 Convertible Sedan

Posted by HH56 On 2011/3/10 13:02:09

Sorry about the tap. That is going to be a tough one because of the size. Don't know of any extraction tools small and strong enough to go between the flutes that is worth a darn--although McMaster-Carr has one for a 4 and might be worth a shot.

I have had some success with left handed drills. If you can get a Dremel with a carbide or diamond point to locate and start a center and then drill left handed, it might bite enough or catch on one of the flutes to start backing it out.