Re: "Waking Sleeping Beauty" .... The Blog!

Posted by BigKev On 2011/2/16 22:14:23

I think the problem with the filler on the tank picture above is first the angle and curvature as Howard mentioned. But the big problem is that the filler comes out of the top half of the tank. This would probably run right into the frame rail. The Packard filler tube attaches to the bottom half of the tank and runs under the frame fail. The vent tube comes out of the top of half and runs over the frame rail. Hence the need for the rubber hose in the vent tube.

Attach file:

---

  (28.41 KB)


  (35.40 KB)


  (34.91 KB)