Re: Henry's 55 Constellation
Posted by Randy Berger On 2008/1/31 12:52:23
Howard, I had to replace the original rear window back in the early 80's. Steele didn't make a rear gasket for the 56 400 then and Kanter wanted way too much. At first I thought Kanter was quoting me for an NOS gasket. 
I went to the local Mopar dealer to get the interlock rubber and can't remember the part number. It was slightly smaller in diameter and I used a cut-off piece of antenna tubing to section out the screw holes. Perhaps Steele makes the interlock rubber as they now make the gasket. Memory says it was about 17 feet long.
I went to the local Mopar dealer to get the interlock rubber and can't remember the part number. It was slightly smaller in diameter and I used a cut-off piece of antenna tubing to section out the screw holes. Perhaps Steele makes the interlock rubber as they now make the gasket. Memory says it was about 17 feet long.This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=4779