Re: Ken's 1937 115C Touring Sedan
Posted by JD in KC On 2014/9/27 10:09:54
The valve spring compressor should look something like this:
I got mine off ebay.
I've never removed the valve guides but I believe they are usually driven halfway down into the lifter gallery, clipped off with a cold chisel and then driven out the rest of the way. If I'm off base, I'm sure someone will be along to correct me.
Edit: If you have the lifters out, you should be able to just drive the guides completely out into the block.
Attach file:
(33.98 KB)
I got mine off ebay.
I've never removed the valve guides but I believe they are usually driven halfway down into the lifter gallery, clipped off with a cold chisel and then driven out the rest of the way. If I'm off base, I'm sure someone will be along to correct me.
Edit: If you have the lifters out, you should be able to just drive the guides completely out into the block.
Attach file:
(33.98 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=150521