Re: Todds 1930 733 7P Sedan
Posted by tfee On 2011/10/18 13:39:59
Back to Kingpins. The old kingpins had grooves worn in them from the constant beating they took and replacements were nonexistant. I had brought this up on another board and someone suggested I use bearings from an Australian SUV as replacements. Seemed like a good idea so I ordered a set from down under. The new bearings are hardly a drop in replacement though so I had to redesign the old kingpin to accept them. Below are some drawings I did in order to get a shop to modify my pins.
Pic 1: This is the old set-up
Pic 2: Drawing of old set-up
Pic 3: Section thru redesigned assembly
Pic 4: Modifications to existing kingpin
Attach file:
(60.24 KB) (67.28 KB) (95.45 KB) (65.95 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=88109