I had the modified pins pressed back in to the axle last week and mounted the springs and front axle back on the frame today using my fancy new shackle bolts. I assembled the steering knuckles on the kingpins and they work nicely however it turns out my upper bearings also need to be replaced. These bearings are under just a small amount of thrust load but it was enough to create gouges in them similar to the old bearings in the base of the knuckles.
Attach file:
(51.83 KB)
(43.37 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=88760