Re: Wile Family's Second Packard

Posted by HH56 On 2013/11/20 11:29:55
Quote:
it now appears that the correct procedure would be to disconnect the pull handle rod from the hand brake assembly under the hood, pull it out; remove the old rusted bracket; reinstall the hand brake rod; and then bolt the bracket to the bottom of the dash.


Correct. There should be a small spring at the mechanism end holding the rod in the hole. There are also one or two flat leaf springs at the bracket end to keep the rod from rattling in the bracket.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=135401