Re: Wile Family's Second Packard
Posted by HH56 On 2012/3/20 10:52:24
Randy, I can't find it either at the moment. Seem to recall it maybe was in conjunction with something else and believe it was captioned "the stop is positioned 90 degrees offset from the previous position" or something along those lines. Will look some more later.
EDIT: I think this is the one. From a Stude published bulletin. Believe that orientation is only the cast iron cases. On an aluminum case parts trans I have, the leg is behind the lever and it rests against the jog in the case. Yet the picture says the 55 is 90 degrees different from 56 instead of flipped 180. That 90 degree difference would also seem to be appropriate with that particular stop and may be correct. Guess that particular stop can work either way in a 56. Interesting.
Attach file:
(40.90 KB)
(17.33 KB)
EDIT: I think this is the one. From a Stude published bulletin. Believe that orientation is only the cast iron cases. On an aluminum case parts trans I have, the leg is behind the lever and it rests against the jog in the case. Yet the picture says the 55 is 90 degrees different from 56 instead of flipped 180. That 90 degree difference would also seem to be appropriate with that particular stop and may be correct. Guess that particular stop can work either way in a 56. Interesting.
Attach file:
(40.90 KB) (17.33 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=97113