Right front brakes going back together. I used 1/32" gasket material for the inner grease shield, and 1/64" for the spindle gasket. Cut them by hand with scissors and an X-acto knife.
Attach file:
(38.09 KB)
(47.37 KB)
(37.76 KB)
(32.44 KB)
(33.21 KB)
(34.45 KB)
(45.26 KB)
(48.68 KB)
(44.83 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=97080