Quote:
Gar wrote:
I have a 57 that will not start in neutral. I checked my wired connection and they appear to be OK. Is there anything that I should look at before I keep trying to find a new switch?
I have been looking for the switch 534390 for about a month now...
(57 with auto, ps, pb)
Thanks
There should only be 1 bushing on the Selector Shaft Arm on the transmission.
Under the Battery Box, where the switch mounts on the steering column, there is a 5/16 headed bolt on each side of the Switch, the switch is slotted where the bolts go through, allowing for SOME adjustment. I have mine set about in the middle with a New Rubber Bushing on the Selector Shaft on the Transmission.
The hole in the shifter arm comming off the steering column does not take a bushing, and can get really sloppy, but unless someone has tampered with the shift rod, you really shouldn't need to adjust much, try the selector shaft bushing 1st.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=252934