Re: Alum bronze cam bearings 55-56
Posted by Jack Vines On 2013/12/15 19:55:43
Riki, if you're asking about the holes at the front of the oil galleries, they're covered by the cam retainer plate and spacer and the slots on the back of the plate feed oil to the cam chain and fuel pump eccentric.
Can't remember if we've confirmed you have the late design plate and spacer, but that's a must.
jack vines
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=136644