Re: Power Window Modern Conversion
Posted by Craig Hendrickson On 2014/6/11 14:24:59
I missed posting a few pictures that should complete showing the installation.
The top of the Autoloc track also required a shim to get it to align with the window glass rails. I used a 5/16 nut crazy glued over the threaded hole to get the right spacing. Also pictured is the resulting fitment and clearance with the window glass down and the attachment to the inner door panel.
Here's the original Packard regulator and motor which was replaced:
Here's how I held up the window glass while fitting the Autoloc track, lift and motor:
Craig
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=145361