Anyone use a universal brake pedal/clutch kit?
Posted by 1941Packard On 2024/6/20 23:04:23
First off - To the Packard Purists - I apologize in advance for my sacrilegious thoughts and comments
My 41 is a bit of mess, and I'm looking to make the brake/clutch setup as simple as possible. The complicated bracket filled mess that came from the factory hurts my brain.
Just curious if anyone has ran something like this. I would run a cable for the clutch, with a return spring on the other side of the clutch lever. I'd prefer a front disc brake conversion, but I don't see that available from Kanter anymore?
My 41 is a bit of mess, and I'm looking to make the brake/clutch setup as simple as possible. The complicated bracket filled mess that came from the factory hurts my brain.
Just curious if anyone has ran something like this. I would run a cable for the clutch, with a return spring on the other side of the clutch lever. I'd prefer a front disc brake conversion, but I don't see that available from Kanter anymore?
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=273138