Re: Hi all...new guy here with some transmission questions

Posted by Anthony Pallett On 2013/4/24 18:39:30
An adapter would be pretty easy but they usually go for around a grand (800-900 plus shipping) but you would have the widest options. Finding an original 3 speed or OD trans in my experience is kind of expensive (especially if you need any repair work) and though they are strong they are not near as strong as a lot of modern transmissions. I have heard but not confirmed that a Borg Warner style transmission will bolt up to a Packard bell housing (possibly with modifying a couple holes) If this is an option you in theory would be able to bolt up a muscle car era 3 or 4 speed or a T-5 OD 5 speed out of a Mustang, Comaro, S-10, Ranger ect and they can be had for around 250 bucks give or take and are much lighter than anything Packard put out. Hope this helps and good luck.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=121675