Re: Adapting 1938 top loader to R-11

Posted by Peter Packard On 2013/6/12 5:23:57
Hi all, Here is a write-up on the procedure for an R6, R9 and early R11. PM me if you are unsure. Good luck and all it takes is a steady hand and remember that you are altering the forks from the cane shift ... not the column change shift. PT

Attach file:

doc Size: 991.50 KB; Hits: 107

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=125194