Re: Power Window Modern Conversion
Posted by Craig Hendrickson On 2014/6/10 15:43:25
Lastly, I connected the power leads to the 4-switch using mated (female-male & male-female) connectors. I tested window powered operation using my Pat's battery through the ignition switch (like normal). It works perfectly!
I'll do the passenger side next as it's motor has about given up too. The window glass is cracked, but I have a spare that I will use.
All is starting to get well with the (Packard) world again!
(last initial series of posts).
Craig
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=145300