Continuing with the chassis sub-projects: removing the left side torsion bars.
The first thing to do was free the loads on the left front and rear torque arms. To free the left front, we removed the left upper and lower control arms. This also allowed us to remove the torque arm to lower control arm adjustable strut.
Unloading the upper control arm:
Disconnecting the upper control arm inner pivot bar from the frame:
Front suspension lower control arm disconnected, arms now free and torque arm is unloaded:
Following a similar procedure on the rear torque arm:
Both torque arms are load-free.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=160298