Re: 6-12

Posted by steve-52/200 On 2015/6/29 20:13:49

Hi I used a ultra torc 11 adaptor for the 727 then went a step further and put in the overdrive 518 so it has two pressure switches ( hydrolic)
The two switches lock the torc converter and
Put in the overdrive
They are 12 v neg gr switches
I used this module to isolate and sply the 12 v from my 6 v system
Www.6 to 12 volt.com they are for 12 v accessories like a sound system
I think ,my electrician hooked it up wrong
It's warm with the car off
Which in my book means it's got to be shorted ,
Alto the car didn't know which gear to be in in was hopping all over the place
Then I over heated and don't know of that was related or because of a new rebuild or what , ! Quite a day
So I thought I would abandon the converter and go to 12 v
So I could get a power gen , a new pertronix for 12 v neg
Take my packard starter to the starter shop?
Get a 12 v solenoid for it ,will it run backwards if it's neg ground.?

And resisters for the dash gauges . Then I can just power up the switches w 12 v and maby she'll fly