Re: Straight 8 Head Modifications

Posted by Owen_Dyneto on 2009/4/10 13:29:52
There are plenty of folks out there who have milled a Packard head 0.030" and bent the valves as they hit the head because they failed to consider if the head had been previously milled. And then you can be in a real pickle, new heads are rare, and double-gasketing or useing extra thick custom head gaskets doesn't usually work for long.

What's wrong with leaving it stock?

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=25796