Re: Electronic ignition
Posted by HH56 On 2023/9/10 17:22:30
Quote:
I would suspect anything that is 6V compatible would use 3.3V for power and logic if the designers had any sense (and parts availability) but who knows.
Maybe but as old and seemingly unchanged as the Pertronix is and the fact it wants to act up with almost any voltage drop I was thinking TTL at 5v is the likely family they chose even if it is very rigid as to needs. I think TTL is still less noise sensitive and can withstand rougher handling than some of the other and later families and that might be a factor too.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=261445