Treadle-vac replacement, ABS Power Brake kit

Posted by Mopar_Earl On 2024/1/26 21:31:12

Hello all,
I received my ABS Power Brake treadle-vac replacement kit. I thought I'd start my own thread on this subject.

This should fit 51 to 55 cars.

The floor plate and brake pedal assembly is well made.

I grabbed some pics and attached them.

I currently working on laying the new floor plate assembly over top of the inplace OE plate. But need to figure out how the accelerator pedal pivot pin is held in place. Need to remove the pin so I can pull the accelerator pedal to pull the carpet back. I have the clutch pedal pad removed and the brake pedal from the treadle-vac rod. Anyone happen to know what secured the accelerator pedal pivot pin?

The brake pedal did measure in at 4:1 ratio. I didn't get a chance to do much else.


Thanks,
Earl

Attach file:

---

  IMG_20240124_160748731.jpg (3,081.55 KB)


  IMG_20240124_160755918.jpg (3,006.39 KB)


  IMG_20240124_160800047.jpg (2,872.11 KB)


  IMG_20240124_160827166.jpg (3,128.90 KB)


  IMG_20240124_160835634.jpg (3,845.21 KB)


  IMG_20240124_161654360.jpg (3,498.99 KB)


  IMG_20240126_154747489_HDR.jpg (3,192.42 KB)


  IMG_20240126_154736967_HDR.jpg (3,413.58 KB)