Re: Lowering front end of 55 clipper w/ tl system

Posted by Craig Hendrickson On 2009/5/27 15:25:16

The 55-56 Packard Torsion-Level is essentially a springy teeter-totter (seesaw). The length of the front torque arm links determine the preload, i.e., the loaded static pivot point of the seesaw.

Here's a thread discussing adjusting the height:https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=1870&forum=3

There are also other threads if you search the V-8 section.

Craig