Re: 19th-21st Series Clipper Dashboard Service
Posted by Dave Kenney On 2010/1/1 12:57:36
Depending upon what you want you can remove all the gauges as a unit or individually in pairs. It's not easy but I have removed all the gauges on my '47 without removing the dash as a unit or the windshield. The gauges are removed in pairs after 4 screws are removed from the corner of each pair (amp and gas, temp and oil) backing plate Attached is a photo I took of the temp gauge. Notice the screws in the lower right corner. They are the bottom screws to the two backing plates holding the gauges. I also have a spare set of gauges that I can take a photo of to better show you the layout if need be.
Attach file:
(67.40 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=44207