Re: '38 tranny to 53 patrician, will it work?
Posted by Ozstatman On 2010/2/22 5:42:09
Quote: G'day monypenny07,
to PackardInfo. I see you first posted in response to this thread did you follow that through? Could you ask your friend with the '38 8 to join PackardInfo also? Be good to talk with him too. And he could include his '38 Packard Eight in the Packard Owner's Registry here, together with a pic, any known history and how he acquired it. Concerning your query I see Peter's response but I have a few thoughts as well. Is the '53 Pat engine out of a manual trans car? If yes, then a lot easier as you won't have to chase up a manual bellhousing, flywheel, clutch, etc, etc to fit it. And Peter and others can help here, because I think the manual trans should bolt straight to a 327 manual bellhousing, please correct me if I'm wrong. Concerning Peter's suggestion of Overdrive, I think this would require chassis modifications to the X-member.
Quote:Peter,
Where can the "Packard tech instruction" you cited be found? Is it somewhere here? I had a look in Packard Literature and Manuals and didn't find it.Can the later 327 engine be converted to the front engine mount? Just answered my own question by looking at Eric's Speedster Blog - Page 7 Because of the 327's greater length, is the radiator in the '38 relocated forward?
monypenny07 wrote: Hi Guys, Need some advice for a friend. He has a '38 Packard 8, manual transmission but wants to put a '53 Patrician motor into it, will this work? Is there a way to get the '53 motor to bolt up to the '38s transmission? Any suggestions/advice would be appreciated before we go ahead and buy/go get the '53. Thanks alot.
to PackardInfo. I see you first posted in response to this thread did you follow that through? Could you ask your friend with the '38 8 to join PackardInfo also? Be good to talk with him too. And he could include his '38 Packard Eight in the Packard Owner's Registry here, together with a pic, any known history and how he acquired it. Concerning your query I see Peter's response but I have a few thoughts as well. Is the '53 Pat engine out of a manual trans car? If yes, then a lot easier as you won't have to chase up a manual bellhousing, flywheel, clutch, etc, etc to fit it. And Peter and others can help here, because I think the manual trans should bolt straight to a 327 manual bellhousing, please correct me if I'm wrong. Concerning Peter's suggestion of Overdrive, I think this would require chassis modifications to the X-member. Quote:
Peter Packard wrote: G'day all, Yes, a 1953 327 will fit into a 1938 120 and there is a Packard tech instruction on how to do so. I fitted a 1954 -327 into my 1938 -120 and it works fine. The complications arose when i fitted an R6 overdrive into the drivetrain. It would also be possible to fit a 38 gearbox into the 53 but you would have to source a few bits and modify the tailshaft. You would be better to fit an R11 to the 53 Patrician. I am really not sure of what you want to do to what and why? Best regards Peter Toet.
Where can the "Packard tech instruction" you cited be found? Is it somewhere here? I had a look in Packard Literature and Manuals and didn't find it.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=47901