Re: '38 tranny to 53 patrician, will it work?

Posted by Peter Packard On 2010/3/5 2:01:40

G'day all, Here are the basic Packard instructions for fitting a 288 engine to a back to 120C Packard, The 288 has the same block length as the 327 even the nine main 53 engine. It says export ( read RHD) but it would be simpler with LHD. There is some mucking around with engine mounts on the 51-54 but it is pretty straight forward, until you start to fit the overdrives to pre 39. It looks like the scans came out pretty badly so i shall probably email them to Big Kev and I hope that Big Kev is able to put them into the Tech Instruction area of Packard Info so interested persons don't have to sift through old forums. An update. If you are running Windows, you can double -click on each page and it will bring each page up legibly. Good luck and best regards Peter Toet

Attach file:

---

  (70.14 KB)


  (58.48 KB)


  (81.70 KB)


  (89.28 KB)


  (97.71 KB)


  (118.66 KB)