Re: PCV Anyone?

Posted by hammy56J On 2010/8/4 7:48:16

I have installed a PCV setup on the engine for my '56 GH. I used a rubber grommet from a 1965-66 Buick 401 0r 425 valve cover, the one on the front left valve cover. I punched out the center to accept the PCV. I cut off the road draft tube and installed the grommet in the Packard valley cover, the other end of the hose goes to the vacuum connection on the rear of the carb.

Attach file:

---

  (90.64 KB)