Re: M&H Flat head

Posted by steve-52/200 On 2012/1/26 20:37:12

hello ,I have a 327 and am interested in the 288 head mod,this increased the compression? Does this juice the engine if the cam and valves are left alone? How does it work ?Is this a bolt up ?I have replaced the rings and found out my block had already been bored and i think its .6 ovedr so no more of this avenue ,it has stock oversized pistons with a normal top of the pistons .

The other :Timid Mod"thing I am intereted in is the 2 to 4 bbl carb swap by finding a proper intake ,I was looking for a rebuilt 4 bbl that would have been offered at the time (52),i THINK IT WAS A CARTER ,THATS ROCHESTER NOW i think .
You mentioned a holley ,how many cfpm would the straight 8 ingest ? ,have a sugestion of which carb?
what happens to the starter ?,my switch is in the 2 bbl carb off of the accelerator linkage
The other thing I was thinking to do as well is a 6v + ground high output alternator (powergen) ,and 6 v points module pertronix ,as I eat generators at an alarming rate