Re: R9 Overdrive

Posted by packard1949 On 2012/7/27 15:40:43

Skipping all that-OD and the radio are the last 2 things on this car that are not working-I even got the clock to work

Now-back to OD-Howard-I went under the car-#4 terminal is very easy to reach(starring me in the face)-I got condunity with about 1.2 ohms.
This is the pull in coil-correct? I could not get to #3 which is about 180 deg from 4. I did measure at the relay-with the #3 lead removed from the relay about 4 ohm.

This is very concerning-Mark Lambert(packard wizard) looked at this OD some years ago before I purchased it and told the owner there was something wrong in the OD

Could the solenoid be locked up? Also are the terminals on the solenoid in the right places(possible someone reinstalled it incorrectly)

Another thing-with #5 relay terminal grounded-I get5.5-6 volts on 4 and 4.5 on 3 with lead removed from 3-voltage is 5.5v

David