Re: position of R9 Lockout Control Lever on OD case ?
Posted by HH56 On 2012/10/17 17:24:11
Quote:
Believe there are 4 wires on the R11 relay. Will look very much like this one.
That small box with 2 wires, if attached to accelerator linkage may be the accelerator switch -- part of the Electromatic clutch.
Attach file:
(9.83 KB)
Owen_Dyneto wrote:
You can tell by looking at the overdrive control relay on the firewall. The R-9 unit is about the size of the voltage regulator, black cover, and 6 terminal leads. The R-11 is much smaller, cadminum-plated cover with intergral fuse, and only 3 wires attached.
Believe there are 4 wires on the R11 relay. Will look very much like this one.
That small box with 2 wires, if attached to accelerator linkage may be the accelerator switch -- part of the Electromatic clutch.
Attach file:
(9.83 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=111521