Re: position of R9 Lockout Control Lever on OD case ?

Posted by John Brinegar On 2012/11/7 10:19:42

HH56 - I have the wiring diagram for the rear lights. I MAY have found what caused this problem. The original drop down wire to the license plate has been cut, and a new wire run from the license plate light to one of the incoming square connectors. I dont know why this was done unless the original wire had a break. Looking at this wire from under the car, it looks like it could be shorted where it comes thru the grommet. So, I think I will unplug this wire from the square connector and remove the license plate light assembly. IF this is the problem , I can correct it. But still dont know if the circuit breaker will reset - probably not.