Re: Packard Hydro-E System

Posted by David Childs On 2012/12/24 10:59:08

Hi and thanks for input: I am working @ using the 3/4" heater hose to insulate the new hose all the way inside the door pillar and secure it; thus when door is open, in the space between door and frame you would see the 3/4 hose and the electric lines which are already taped tgether with electrical tape. THEN, inside the door, out of sight I would slip the elecrical wires through the 5/8 heater hose and secure it to the 3/4 hose containing the new fluid hose, and somehow secure both to the inside of the door. Then go back and tape together the 3/4 hose and taped electrical lines in the space between door and frame. That's as close as I can come to the original setup.