Re: series 22

Posted by HH56 On 2013/2/5 11:50:57

If you want to use the key switch you need the battery connected to ground and to the starter solenoid per usual. From that battery solenoid post you need a wire to ign switch AM terminal. If you are holding the switch so key faces you the way it would be positioned in dash, that should be the short top terminal on left -- but verify your labels. From the COIL or short terminal on bottom, connect a wire to the coil hot side terminal. From the GA or long terminal on top right you need a wire to the carb starter switch and out of the other terminal on carb starter switch to the solenoid starter terminal.

There is another much quicker way but since you are not electrical, to make it simple and easy those connections should let you turn key, push on gas pedal to start, and then turn off when finished.

Without a loom nothing else in car should be connected but not knowing what wiring condition or how other things are left connected in your car, verify nothing is shorted.