Re: 1950 2395 Floor Pans

Posted by BDeB On 2013/4/17 0:34:48
Floor pans are the same for 2 & 4 door cars.

The front repair panels from C2C are missing some of the contours that are present in the factory stampings and the depressions for the body mounting bolts are only shallow dimples as opposed to the deeper ones in the originals. They take a lot more work to fit than the 1951-54 repair panels.

Their trunk repair panel is better but still has only shallow dimples for the rear body mounting bolts and is missing the small raised dome in the middle that is needed to provide clearance for the fuel tank sending unit wire. I didn't use the trunk repair panel as I had a used original that turned out to be OK.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=121211