forensic dentistry advice

Posted by steve-52/200 On 2013/7/1 23:42:15
Hi I need advanced esoterica advice
Im re doing my grill on a 52 200
there's 8 teeth
the central 6,(#' 2 through 7 ; 3 on each side ) are all the same
there's a smaller tooth on the outer edges #1 and 8 ,
so my question is how to tell apart the right and left or better the passenger side outer tooth from the driver side outer grill tooth ,they are slightly different

on inspection ; the upper edge of the tooth has a snipped off rear corner on one side and not the other ,so if the tooth is facing me the typer its the left upper corner is cut off .

also the lower edge protrudes a but further below the 2 hole mounting plate and the same side as the notched upper edge ,
my hunch is that this makes this a left toooth as I would be facing the car or better put a passenger side outer tooth
the notch corner being placed to be able to field ther curvature of the inner upper fender any wisdom from the pac-master archeologists?

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=126458