Re: Easamatic Rebuild Sources

Posted by PackardV8 On 2013/8/23 12:08:00

On second thot:
The outer seal, that is the vacuum seal relies on negative pressure (vacuum) on the power unit side as well as positive pressure on the side that subtends with the bottom of the relief port. So then any pressure due to fluid forced down the relief port would only tend to increase the.sealing effect of the vacuum seal.
So any smoke observed then would have to be due to a bad vacuum seal.

When i get a chance i'll try to calculate the max amount of.fluid displacement made by the piston. Calculate the volumn of the reservoir.