Re: Howdy
Posted by Sloride75 On 2013/11/18 18:34:53
Guscha, upon clicking your link I think I've found the disconnect - I used the "regular" POR-15, vice the "tank sealer". As I mentioned above, the tank is not perfectly clean inside. As such, I did not use a sealer, and plan on removing the tank again in the future to clean, seal and paint it.
This time around I simply hit it with a rattle can of satin black to hold external rust at bay, as the MEK and handling scrapes had take a bit of toll on the paint.
Attach file:
(114.06 KB)
This time around I simply hit it with a rattle can of satin black to hold external rust at bay, as the MEK and handling scrapes had take a bit of toll on the paint.
Attach file:
(114.06 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=135320